Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Jan 2016
    Posts
    2

    RTV1100 with a V4291 plow problem

    My RTV1100 with a V4291 plow has a problem. When I start the engine and go to raise the plow from down to up. I push the up switch and let go the plow travels to the full up position. The same thing happens when going down or when the blades are angled forward to backwards. If I shut the engine off with the plow full up and turn the ignition but not to start the engine you can lower the plow down each time you push the down button. Any ideas.

  2. #2
    Administrator
    Join Date
    Jun 2012
    Posts
    1,101
    Welcome to the forum. Sorry, I am not sure why this thread was needing moderation. It should be visible now.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •