Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Jan 2016
    Posts
    2

    RTV 1100 with a V4291 plow

    I have a RTV1100 with a V4291 plow when I start the engine and go to raise the plow I push the up switch and then let it go the plow continues to travel to full up position the same thing happens going down or when the blades are angled either forward or back. If the plow is full up and the engine is off you can turn the ignition switch to on, you can lower the plow down normally. Any ideas on what to look for.

  2. #2
    Administrator
    Join Date
    Jun 2012
    Posts
    1,101
    Welcome to the forum. Sorry, I am not sure why this thread was needing moderation. It should be visible now.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •